SPECIAL PARTS DEVELOPMENT

LOUVERED PLATES  (JACKARNO COMPATIBLE PARTS)

Design © Mike Dennis Mecarep August 2003

 

 

Most model makers with Meccano have trouble making louvers especially for smaller sizes of scale model and in particular locomotives and vehicles, where they are needed for realism.

Not all people in the hobby are sufficiently wealthy to afford larger models requiring a ten set by quantity of parts or even larger where the standard methods apply, therefore the problem was addressed by me to coincide with the Bugatti car project being developed by Exacto after I saw the prototype at Skegness in July 2003.

The plates are made by Jack Parsisson to an original suggestion by me in the Autumn of 2003. They can be used on smaller scale models where standard Meccano parts are too large for accurate louvre representation.  The parts were first shown at the RMG meeting 7th Feb 2004.


 
 

Price (EACH):

SINGLE ROW:
5hx3h AUD 2.80 GBP 1.19
7hx3h AUD 3.00 GBP 1.27
9hx3h AUD 3.20 GBP 1.35
11hx3h AUD 3.50 GBP 1.48
17hx3h AUD 3.80 GBP 1.61
19hx3h AUD 4.00 GBP 1.69
25hx3h AUD 4.80 GBP 2.03

DOUBLE ROW:
5hx5h AUD 3.40 GBP 1.44
7hx5h AUD 3.60 GBP 1.52
9hx5h AUD 3.80 GBP 1.61
11hx5h AUD 4.00 GBP 1.69
17hx5h AUD 4.40 GBP 1.86
19hx5h AUD 4.80 GBP 2.03
25hx5h AUD 5.60 GBP 2.37

Prices subject to change!

Write Jack Parsisson for more information.
 
 

Home